Check the firmware release notes: CU 5.10 / DSP 2.83, 2-2-2015
* EASIER DIVERSITY RECEIVE SELECTION: A regular hold of SUB now goes directly into diversity receive, without first having to go through "LINK". This should benefit most users of the KRX3 sub receiver, since few use the VFO linking function. Those who do use VFO linking can still turn it on by setting CONFIG:VFO LNK to ON. This menu entry can be assigned to a programmable function switch for easy selection if desired, eliminating the need to bring up the menu. Note: Remote-control command "LN" is another way to accomplish VFO linking. 73 de Dick, K6KR -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of ayoshida Sent: Thursday, June 18, 2015 19:47 PM To: [email protected] Subject: [Elecraft] K3 Sub button K3 FW 05.14 I do not know when it started this problem, however short holding and long holding Sub button always initiate Diversity mode. I tried SWH48; command with same result. So I can not initiate Link/Unlink. Any idea ? 73 de aki ja1nlx ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
