Russ,
If you install the KSYN3A for the main and then add the KRX3, you must
have the KSYN3A for the sub as well.
You cannot mix the synthesizers - they must both be the same.
Cheap/thrifty/cost effective does not matter, they both need to be the same.
73,
Don W3FPR
73,
Don W3FPR
On 6/21/2015 8:59 PM, Russ wrote:
All:
For those of you who don't read instructions like me - remember to download and
install the latest K3 utility before uploading the new 5.14 firmware (or above)
- otherwise you may get an FPF load error.
Question - if I decide to install a KRX3 later, can I reuse the old KSYN3 for it -
can the old KSYN3 and the new KSYN3A coexist in the same box? OK - call me cheap
/ thrifty / cost effective or just stupid if you want :>}
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
