I had issues with intermittent connections with the power plug on mine.
Don't remember if I was using the cord that came with The KAT500 or not,
but I haven't had any more problems since I switched to another cord
with a better fitting plug.
Mike
KI0HA
On 6/21/2015 9:45 PM, Jim Hooper wrote:
I turn my KAT500 off, and then turn it on first before powering the rest of my
K-Line on.
But two or three times now the following has happened: when pressing the ON
button for the KAT500, nothing happened. I wiggled the power cable in the
socket on the KAT500, nothing happened. I removed and reinserted the power
cable and the KAT500 powered on automatically with my pressing any buttons.
What might explain this behavior?
73,
Hoop
K9QJS
San Juan Island, WA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
