Steve,
While either the rear phone jack or the speaker jack should work OK, I
would use the phones jack.
73,
Don W3FPR
On 6/28/2015 9:29 AM, evetsmd wrote:
With 4 radios and a computer at the operating position, you can only have
so many speakers before
it gets out of control...
I have an audio mixer that lets me control the inputs and the feed a single
amplified set of studio monitors.
I'd like to connect the K3 thru the mixer....line out to mixer seems to
work but I'd like to keep line in/out
for the digital modes......anyone have thoughts about using the speaker out
jack or phone jack for this approach...
or if you've taken a different approach or seen an article about doing
this, I'd appreciate hearing about it!
Thanks for the help....
Steve
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
