With normal component values, and 7.8 V on 8A, you will get 3.72 V max at U2B pin 5, so you've done everything right. Even with 8.0 V on 8A, you shouldn't get more than 3.82 V at U2B pin 5 with RF gain set full clockwise. (The manual calls for 3.8 Volts there, not 3.9)
--I did find one other thing that doesn't seem quite right. I'm having --some trouble with the AGC circuit, and adjusting R1 on the control --board. It says to adjust R1 to see about 3.9 volts on pin 5 of U2, --but I can't get any more than 3.7 volts. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
