It's time for me to re-read the K2 manual. I was recently wondering why my primary and receive antennas sounded so different when switching between them (K160RX is installed) and feared a 160m module or KNB2 construction problem. That's when I discovered the preamp and attenuator settings are separate for the two antennas. Digging through the Rev. F K2 manual I found this on p. 113, "Options," under the K160RX and RX ANT description: "The receive antenna can have a separate preamp/attenuator setting from the normal antenna (per-band)."
That's the only reference to this feature I've seen, if it's in the K160RX Rev. C manual I missed it. The separate preamp/attentuator settings feature would be worth adding to the K160RX manual. See, the more you operate this rig, the more features you discover! 73, John, N7ON K2/100 S/N 5023 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
