I have set up 3 channels to scan at 50 MHz. Not that it matters, but they are in channels 16-18. First is 50.089.58, second 50.125, third 50.145 MHz, mode USB.
Very often, scanning stops at the last entry (50.145 MHz) and the squelch breaks. I have a constant S3 noise level here (that's another project!) but there are never any signals nor transients. The S meter never shows any type of signal, and there is never any audible signals when squelch breaks, just my soothing :( steady noise level. Even if I turn the squelch fully CCW, i think the value is 30, it still breaks at .145 just as often. In other words, the squelch setting makes no difference. Any ideas what may be causing this and how to tame it? -Chris K1AY -- Life is like Linux - it never stands still. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
