Hi all I have a very odd thing happening in diversity mode after installing the new VFO's. I have a K3 with dual receivers and new VFOs using a dipole and loop antenna when in diversity. I also have a P3. I am on current 5.29 firmware and have successfully gone through all required calibration steps after upgrading the VFO.
Scenario follows ... I am listening to WWV 10 MHz in USB mode. When I am in Split, not Diversity, WWV zero beats at exactly 10.000 MHz. The P3 green band denoting the K3's passband is nicely lined up with the upper sideband of WWV. When I am in Diversity mode, however, WWV zero beats at exactly 9.9985 MHz. On the P3 I clearly see the WWV signal at 10.000 MHz while the green band denoting the K3's frequency is just as clearly 1.5 kHz lower. I can't figure out what is causing this -1.5 kHz shift! I have had my K3 for some time so I feel I am reasonably competent with it :) but this has me stumped. I have asked K3 Support about this but I thought someone out there might have seen and dealt this this already. 73 Rick AG6AY K3 5706 P3 1835 -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Odd-freq-shift-in-diversity-mode-after-VFO-upgrade-tp7604845.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
