Peter,
Turn on SPLIT - you will see that the little TX arrow to the right of
the display now points to VFO B (It was pointing at A before engaging
SPLIT).
That arrow tells you which VFO will be used for transmit.
Turn the VFO B knob to the frequency you want to use for transmit.
If you have the subRX installed you can turn it on and listen to the
transmit frequency in one ear.
Without the subRX, hold the REV button to temporarily listen to your
transmit frequency. Release the button to hear your receive frequency
again.
That is all there is to it. If you now re-read the manual or the Cady
book, you may understand it better.
73,
Don W3FPR
On 7/12/2015 3:30 PM, PETER HUTCHISON wrote:
Yes - I have read some of the previous threads but am still confused re Split
working...
I need to monitor the FSK441 calling frequency of 144.370 on my K3 / tvtr
combo. Then, when I see on the ON4KST chatroom that the other station is
monitoring say 144.380 to be able to set the rig up to Tx on that frequency
automatically when I Tx on FSK441. Then, return to the Rx frequency when FSK441
automatically goes to Rx. I don't want to be manually switching VFOs as per
what it seems to be saying in Freds book
I've gone round and around in circles and need an idiots guide with real
examples to get to grips with the issue. In this respect EME is far easier - no
split working which is one reason I've steered clear of FSK441 but I feel I'm
missing out and need all the assistance I can get in obtaining DXCC on 2m!!!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
