I have successfully used the KX3 RX I/Q with CW Skimmer. You will need a sound card with stereo input (Signalink won’t work) and possibly isolation transformers on the input to the sound card to remove spurious signals. I used a Griffin iMic which is not the world’s best sound card and isolators from Radio Shack. If you are going to buy a sound card for this application get one with at least 96K bandwidth so you can see the entire CW sub-band on most bands. Also, I had to change the Skimmer settings to use Q/I instead of I/Q. Once you get it set up it is great. My goal is to get a PX3 and run Skimmer off of the PX3 output. I got to play with it one weekend and it is the ultimate setup for CW contests that allow assists.
> First post here. > Can the KX3 RX I/Q output be used with the CW Skimmer program? > > Anyone any experience with this?love to hear. > > Gerard VK2JNG 73 de AF9W Bob Stephens ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
