Tom,
The "Y" cable shown there is just an example. For a particular
transceiver one have to refer to the pinouts shown on the next pages
of the ACOM 2000A manual. For K3 a male DB9 connector have to be used
on the place of the female connector shown on the generic "Y" cable
picture. That mirrors the pins as you can see on the K3 cable diagram
(Fig. 7-6).
Should you have more questions, please do not hesitate to write to
a...@acom-bg.com
73, Val LZ1VB
I have tried the various configurations shown in the Acom 2000A
manual to
connect the CAT input on the Acom to the RS232 Connector on the K3.
Using a
"Y" cable and their pinout takes down the RS232 between the radio
and
computer. Anyone been successful at this?
Tom Taormina, K5RC
Comstock Memorial Station, W7RN
Storey County ARES, KS7AA
www.w7rn.com <http://www.w7rn.com>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
