Sure thing, Alex!
The attenuator switches in and out with a latching relay and the preamp too,
so it's cycling one click > one click > two clicks almost simultaniously. Is
there any effect noticeable while pressing the button?
73,
Peter
PA0PJE
----- Oorspronkelijk bericht -----
Van: "Alexandra Carter" <[EMAIL PROTECTED]>
Aan: <elecraft@mailman.qth.net>
Verzonden: maandag 23 januari 2006 13:33
Onderwerp: [Elecraft] Tests right after first powerup
My K2 powered up like a champ, had the messages and start up freq exactly
as mentioned in the manual, and the relays click in the band change tests,
but I'm puzzled, the manual says the relays should also click when tapping
the PRE/ATT button and they don't on my K2. What am I doing wrong? 73 de
Alex NS6Y.
PS - the RF probe is a pain in the butt to make, can I just use my 'scope?
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
