Hi Ken, Thanks for the report. We'll be listening for you.
73, Wayne N6KR On Aug 1, 2015, at 10:38 AM, Ken Roberson via Elecraft <[email protected]> wrote: > Hello all, > Today I finally had time to finish the K3 low frequency mod, adding the caps > and removing the inductors from the band pass board.All went well, this is an > easy mod even for an old ham.With my calibrated ear and S meter it is > noticeable that the noise is lowerat the low end of the band (100 khz ).The > NDB were also stronger, From central Oklahoma in the daytime I amable to hear > stations in TX,OK,KS,AR,NE some as far as 500 miles.Antenna is a 60 ft 630M > top and base loaded vertical.The K3 is working very nice on the 630M > experimental band.I have been TX/RX on this band for almost two years with > experimental license WG2XXM. > Most of the time running around 5 watts ERP.The 475 khz 1mw signal coming > from the K3 is going into a HB Class D PWR AMP.Running WSPR and JT9 most of > the time.I have been off the air for a while doing another hobby with my Son > ( Astrophotography ).Weather permitting I will be txing WSPR tonight.Set your > radio to 474.2 upper side band WSPR software.You will see my trace at + 1520 > -- that will be 710 on the waterfall.Thanks agn Elecraft.73 Ken K5DNL/WG2XXM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
