???? No text except title?
I have the same issue on my KX3-2m: "Hi-Current" blinking even on dummy
load but 3 W output still available . Having a loose SMA connector , I
had to open KX3 and extract 2m card in order to tighten SMA nut (very
annoying!) . I found it was convenient to use a short piece of coax
cable with SMA male connector and N female (or what you want) at the
other end in order to avoid stress on SMA female on KX3 .
KX3-2M is very sensitive but a lot of birdies presents so this is not
very compatible with weak signals reception, even using transverters in
front adding noise masking the weakest ones compared to my IC-7400 and
other transceivers . My DB6NT microwave transverters are well driven
into TX using + TX available on SMA inner conductor; very good point!
Another issue I have is a sort of "microphone effect" in RX ; not sure
this is the right words ?
Any help?
73's.
Jacques F6AJW/IN93EK
Le 01/08/2015 15:18, John Sager via Elecraft a écrit :
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
