Ed,
To further address your original question --
If you add the KPA100 to the base K2, then those options that are
mounted in the K2 top cover are not compatible with the KPA100. That is
the KAT2, KIO2 and the KBT2.
If you wish to configure it as a complete K2/10 with a KPA100, consider
mounting the KPA100 in an EC2 enclosure. That is easiest done if you
add the KAT100-2 along with the EC2 enclosure. The KPA100 plugs right
into the KAT100-2 board. That does require that you have the KIO2 in
the base K2.
73,
Don W3FPR
On 8/2/2015 7:07 PM, Edward T. Tanton wrote:
I have K2 SN 00057. It is the most basic it can be. I stopped once it was
working even though I had lots of the original add-ons because I was simply
having too much fun.
So, here is my dilemma: I have ALL of the options except the KPA100,
including updates & DSP, but have not yet installed any of them. I hope to
even get the KPA100 for a combined late October birthday/Christmas. Does
anyone have a list of a) what order I SHOULD install them in; & b) which
ones should NOT be used with any others? (I understand the battery and I
THINK the internal antenna tuner are not usable with the KPA100.) Thanks.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
