Removing the entire left side panel makes installation of the KXV3B
module even easier.
As an additional hint, bend the pins of the KXV3B connector slightly
toward the front - about 1/16 inch at the tips of the pins is enough.
That will allow you to more easily install the new option.
73,
Don W3FPR
On 8/2/2015 8:08 PM, Jobst Vandrey wrote:
As others have noted, removing the two screws on the rear of the left panel
makes the installation easier. Especially in order to attach the lock
washer and nut on the bottom corner of the KXV3B module with my XXL
fingers..
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com