Arie,
The K3 may be in diversity, but you will only hear in diversity mode
when the audio is A-b.
The diversity effect is 'in your head' as your ears naturally pick up
the differences between the two receivers and your brain figures out
which is the best to hear.
When you have the audio set to A-A or b-b, you are hearing the audio
from only one receiver, and by definition, that is not diversity reception.
73,
Don W3FPR
On 8/3/2015 10:30 AM, Arie Kleingeld PA3A wrote:
Don,
to set things up, I use a macro programmed in the F12-key in N1MM to
copy the freq/mode/BW From A to B, switch on the SubRx, set audio to
A-b listening and Link the VFO's. Switching of the audio is done in
F9-F10-11 to A-b, A-A, or b-b respectively.
Of course I would like that I could switch the audio when the K3 is in
diversity mode, but That cannot be done in current Firmware. In
diversity the audio is fixed to A-b.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
