I reported at the time (January I think) that the SVGA NB status wasn't being saved. That appears to be still the case here.
73 Stephen G4SJP On 3 August 2015 at 22:53, Tom <[email protected]> wrote: > Hi, > Funny thing, the SVGA noise blanker and a number of other items were added > in a January release of the beta software. I recall it was working, but > there has been no production release since then except for this new beta > version. > I hope that with the new K3S there is a little more commitment to the P3. > 73 Tom > From: Guy Olinger K2AV > Sent: Monday, August 03, 2015 5:39 PM > To: Tom > Cc: Dan Maase AC6DM ; Elecraft Reflector > Subject: Re: [Elecraft] P3 - still in trouble with new firmware > > Will add my name to list about no NB on SVGA. I didn't know that was > supposed to be working. Additionally bringing up the NB Level menu entry > blue screens the SVGA display and shows Tx/Rx Data Font: 0 in the upper > left hand corner. > > My ancient data processing bug instincts scream mismatched data position > definitions, but that that's just from an old systems design crank :>) > > Did the firmware files get back leveled or something? This really looks > like something that would have been fixed in house before public release. > > 73, Guy > > > On Mon, Aug 3, 2015 at 5:17 PM, Tom <[email protected]> wrote: > > Hi, > There seems to be some issues with this release of the firmware. I have > the same issues as the others with all of the correct versions of the > software (1.24 and 1.5). I also performed a parameter reset. > In addition to the issues reported here, the noise blanker no longer > works on the SVGA, and the per band settings of the noise blanker are not > updated on the SVGA display as you change bands. > I guess there should be another iteration? > 73 Tom > va2fsq.com > > > > -----Original Message----- From: Dan Maase AC6DM via Elecraft > Sent: Monday, August 03, 2015 4:43 PM > To: [email protected] > Subject: Re: [Elecraft] P3 - still in trouble with new firmware > > Stephen: > Posted this to the wrong thread earlier. > > Have you loaded the new SVGA firmware 1.24? You need this as well as > the P3 > firmware 1.50 for the SVGA to function correctly. > I've installed both and have not observed the problems reported. > > See Paul Saffren - N6HZ message on FW loading sent today. > > 73, > Dan AC6DM > > > > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > > > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
