Hi Graham, Check the KX3 TX DLY menu. The default is 5 milliseconds and you can increase it to 20 milliseconds.
Cheers, Fred KE7X Author of: "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the summit" "The Elecraft KPA500 and KAT500 - the K-Line Dream Station" Printed, coil bound copies of these are all available at www.elecraft.com KPA500 and KAT500 Quick Set Up Guide http://www.ke7x.com/home/k-line-introduction-and-set-up-guide KAT500 and KXPA500 Tuner Operation http://www.ke7x.com/home/kat500-and-kxpa100-tuners "The Elecraft KXPA100, PX3 and 2M/4M Transverters - Assembling the KX3-Line Station" available at www.lulu.com. "The Elecraft K3S and P3" and a 3rd Edition of the K3 book with K3S upgrade parts are works in progress. > -----Original Message----- > From: Elecraft [mailto:[email protected]] On Behalf Of > Graham g3tct > Sent: Tuesday, August 04, 2015 11:26 AM > To: Elecraft reflector > Subject: [Elecraft] KX3 - is a TX DLY function available? > > I have no problem driving a linear with a slow relay from my K3, but my > KX3 causes the linear to trip out when I try to use the cw in ssb mode > (cw in cw mode behaves ok). In the K3 manual it refers to the delay in > producing RF - TX DLY which has a default of 8ms. But I can't see an > equivalent function in the KX3 - might this be the problem, and what > default value does it use? > > Graham > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
