RE: High Speed CW issue with dropped characters/delay at high speeds with K3/P3 I've been corresponding with Marc on this and we've made an interesting discovery. We lowered the port speed and could not duplicate the dropped characters, although he did experience the delay. I've included his email response in this post.
******************* Wow, Jer, you may have discovered something important. I just did a non-exhaustive test of the keyboard with SVGA where the P3 and K3 are set to 4800 baud. Not one single dropped character! This is a first in my experience. The 4 second (approx.) delay still occurs every 132 (approx.) characters but that always seemed an unrelated problem. I'm including Paul Saffren at Elecraft in this e-mail since he has strong interest in this problem. The keyboard I used for the test is an Anker wireless. Now I'll try a Geyes wireless which Elecraft suspect of being incompatible with the USB library currently used in the SVGA card. - Marc W8SDG On Aug 5, 2015, at 2:49 PM, Jerry Moore <je...@carolinaheli.com> wrote: Yes, RS232, can you check and lower the port speed to see if it resolves the cw issue? ******************** ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com