Interesting observations after upgrading my K3 to the KSYN3A this evening.
1. I was already running 5.14 firmware. After installation I upgraded to 5.29 but the DSP was already at 2.83 so I only sent the MCU and FPF firmware. After the upgrade I started getting ERR DSE. Reflash of all firmware corrected the problem.
2. I had recent success with the TX gain calibration for the 5.14 upgrade. After fixing the ERR DSE issue with the firmware reload, the 5w TX gain calibration failed on 40m with error of it settling on 5.4w. I'm using the latest K3 utility on a Mac to perform the calibration. I ran it again with the same result but this time proceeded on to the 50w calibration which succeeded. I then re-ran the 5w calibration and it was successful.
All is working well now and I'm happy with the upgrade. Tighe NK4I -- Tighe Kuykendall NK4I | www.NK4I.com | @NK4I ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
