This is an RTFM problem.
I was confusing the KX3 Table with the K3 Table.
When I used the proper values from the K3 Table, it worked perfectly.
73, Byron
MACRO1-4: #11, 12, 13, 24
PF1-PF2: #45, 47
On 08/13/2015 08:14 PM, Byron Peebles wrote:
I am trying to program my first "Rotating Macro", where the PF1 Button
will set SPLIT+1 the first time it is pressed and held and it will
UNSET SPLIT the second time it is pressed and held.
I am basing this on the work by W8TN and LA3ZA, and others who have
offered support here.
I have had PF1 as SPLIT+1 and PF2 as SPLIT+5. They are saved in
MACRO1 and MACRO2, respectively.
I am trying to add MACRO3 and MACRO4 to CLEAR SPLIT and set to SPLIT+1
and SPLIT+5 again.
I added the following to MACRO1 based on the Programmers reference:
MN110;SWT20;SWH18;SWT14;
#20 is listed as MACRO3, #18 is listed as PF1.
But, the SPLIT part of the MACRO works, but the MACRO is not
reprogrammed. So, little joy.
When I execute the MACROs from K3 Utility, the reprogram things fine.
But not when I hold the button.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
