Please see the example configurations for Digikeyer II and MMTTY and for Digikeyer II and N1MMLogger+ available in Router (Help | Download Documents) or online in the Digikeyer II Support area of the web site - www.microHAM-USA.com/support.html.
*BOTH* documents provide separate instructions for AFSK and FSK operation. AFSK operation expects audio to the transceiver's "Line In" jack (not mic jack) while FSK expects a "shift" (on/off) signal connected to the transceiver's FSK input. You will need to configure N1MM Logger+ to send the correct sub-mode to the rig when operating data modes. That information is in the N1MM Logger+ documentation on the N1MM Logger+ web site. For the K3/K3S, *as documented in the Elecraft Owner's Manual*, the proper configuration for AFSK is DATA mode, AFSK A (or DATA A) sub mode. MENU:MIC SEL should be set to "Line IN" and the audio input (mic gain) adjusted for four bars of ALC with the fifth bar just flickering. For the K3/K3S, *as documented in the Elecraft Owner's Manual*, the proper configuration for FSK is DATA Mode, FSK D sub-mode. There is no audio input and there is no control over ALC. 73, ... Joe, W4TV On 8/15/2015 11:12 AM, [email protected] wrote:
Good Morning, This is Mark Griffin, KB3Z. I have downloaded the most up to date copy of MMTTY. I have setup my Digikeyer II to work with MMTTY. What is really weird is that when I press the transmit button on MMTTY I have my K3 set to Data A, but to see any ALC bars or get the normal RTTY noise I must have it set to FSK D. What's really interesting is that there are 7 ALC bars lit. No Flutter or anything like that. But no matter if I adjust the TX button on the Digikeyer II or the Line input on the K3 the number of bars does not go down. Is this normal or what? Once I get MMTTY to work with my K3, I will then try to integrate that with N1MM Plus. But first things first as they say. Any help would be greatly appreciated. Mark Griffin, KB3Z ______________________________________________________________
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
