I would like to split my K3's Rx feed to also feed my new SDRPlay SDR. One way is to put a splitter (I'd use a mini-circuits ZFSC-2-1W+ or similar) between the KXV3A's Rx In and Rx out ports and suffer the 3 dB loss (which should be insignificant since my ambient noise is far above the K3's Rx noise floor.Another way - I think - since I do not have a Sub-Rx is to make the Aux-RF BNC an output fed off of the cable that normally feeds (the nonexistent in my case) Sub- Rx. This leaves RX in/Out available for a transverter later on. BTW - I think this will still incur the 3 dB loss - albeit insignificant For those of you who are more familiar with the topology of the K3 - is there a simple way to accomplish #2 without buggering up the rig? Thanks, Russ KD4JO ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
