My take on this.........a fellow can't have too many radios.
73
Bob, K4TAX
K3S s/n 10,163
On 8/28/2015 7:39 PM, Jim Rogers wrote:
I just got my UPS tracking number and my new K3s will arrive on
Wednsday. So now the decision of whether to keep my K3 100 as a
backup or sell it.
It is s/n 8164 and was purchased in April of 2014. It is a basic K3.
Has the KTCX03-1 1ppm TCXO and the 2.8kHz 8 pole filter, KANT3 (no
antenna tuner). It currently has the K144XV-100-K 2M module installed
but my plans are to transfer that to the new unit. I do not use the
K3 for 2M FM so there is no FM filter.
I use a Timewave Navigator for a one USB connection to the confuser.
The Navigator has a very low noise USB Codec and six serial ports,
CAT, PTT, CW Winkey, RTTY (sure enuff FSK), Aux RS232 (full RS232
great for checking/installing new firmware in the KPA500) and a
configuration port for the Navigator itself. Using the Navigator I
have never had to re-cable to do firmware updates to the K3 or the P3.
Together, the K3 and the Navigator integrate so well together, I am
anxious to see if the K3s with its new interface does it all as well
as the current setup.
Jim W4ATK
K-Line
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
