I have built every K2 option there is. Definitely the KDSP2 is the way to
go. If you are going CW only, the QRO options are not needed, unless you
are severely antenna restricted.
Leroy AB7CE
K2 serial number 40
-----Original Message-----
From: Dauer, Edward
Sent: Sunday, September 06, 2015 9:45 PM
To: [email protected]
Subject: [Elecraft] K2 Options
Still exploring options for a backup rig for the K3. (The KX3 stays at the
other QTH.) Began looking into the K2. The build sounds interesting. One
choice that has to be made is between the KDSP2 DSP filter and the KAF2
audio filter and clock. Apparently it has to be one or the other - not
both. Any advice about that choice? Anyone who chose one now wish they had
done the other? In case it matters I plan to operate CW only, and would
probably go for the internal KPA100 and the external KAT100. Thanks for
whatever counsel might be offered . . .
Ted, KN1CBR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
