Hi Vic, I have the AT-AUTO and it works great with my K3 and Alpha 9500. I also have the RS232 switch that Kessler Engineering sells to switch from direct monitoring of the K3, where it follows the K3 frequency to listening mode when running a logging program like N1MM. It will run at 38400. You will have to go into the menu on the AT-AUTO to change it. The AT-AUTO default is 9600 baud. The manual is on the Kessler Engineering website. Last I saw they were going for between $800 and $900. If you have any other questions, I'll try and answer them.
73, Mark, WB9CIF -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Vic Rosenthal 4X6GP/K2VCO Sent: Tuesday, September 8, 2015 8:25 PM To: Elecraft Reflector <[email protected]> Subject: [Elecraft] Palstar AT-AUTO with K3 I have an opportunity to get a Palstar automatic tuner, the AT-AUTO. This is an older version, NOT the new HF-AUTO. It has an RS232 interface which the manual says can be used in a listen-only configuration with transceivers that send frequency data from a CAT port. It does support the Kenwood protocol. My question is: has anyone used this tuner with a K3, and if so have they been successful in having it get frequency information via the RS232 connection in this way? -- 73, Vic, 4X6GP/K2VCO Rehovot, Israel http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
