Thanks very much, Bill! I looked at that configuration menu, but didn't scroll through it to "USB". GEEZ!
73, Ken, KJ9B -----Original Message----- From: Nr4c [mailto:n...@widomaker.com] Sent: Tuesday, September 08, 2015 10:33 PM To: Ken Bandy, KJ9B Subject: Re: [Elecraft] Connecting K3S to PC Go to CONFIG/ RS232 Baudrate and rotate VFO A knob till you see USB. Sent from my iPhone ...nr4c. bill > On Sep 8, 2015, at 10:16 PM, Ken Bandy, KJ9B <k...@arrl.net> wrote: > > New guy here. I'm the same guy that had the problem with the KSYN3A > board not checking out in my new build. After an email from Gary, > AB7MY, at Elecraft, I removed and reinstalled the board, and it magically worked OK! > > > > Anyway, I got to the part in the checkout of the build where I am > supposed to connect the radio to my PC to calibrate the Transmitter > Gain. After installing theK3 Utility program, I plugged the USB cable > in between my PC and the radio. The driver loaded OK, and made the > radio COM 6. When I start the K3 utility, it finds COM 6, and starts > attempting to communicate with the radio (whether it's turned on or > not). The program is cycling through baud rates, but cannot find the > radio. What do I need to do? I have rebooted the PC a couple of > times and unplugged and replugged the USB cable. > > > > Thanks! > > > > Ken, KJ9B > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com