Correction to the previous post
Chris,
You may want to check your coax connections between the rig, KPA500, and
KAT500.
The KPA500 should be between the rig and *K**AT**500* with regard to the RF.
The KAT500 should be between the rig and the KPA500 with regard to the
DB9 cables. This is so that the KAT500 can interrupt the KPA500 under
high SWR conditions.
Sorry for the error.
73,
Dwayne WV5I
On 9/9/2015 7:50 PM, Dwayne Rohmer wrote:
Chris,
You may want to check your coax connections between the rig, KPA500,
and KAT500.
The KPA500 should be between the rig and KPA500 with regard to the RF.
The KAT500 should be between the rig and the KPA500 with regard to the
DB9 cables. This is so that the KAT500 can interrupt the KPA500 under
high SWR conditions.
73,
Dwayne WV5I
On 9/9/2015 7:18 PM, Chris Johnson wrote:
I have a KAT500 between it and my rig.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
