I agree with Don as well here. I use a Behringer Shark DSP110 which has both balanced XLR and 1/4 inch mono inputs and outputs that can be set to line or mic levels. It also provides a noise gate and mic gain if you need it. You can stay balanced as far as you want. It was ~$50 used. Brian KB1VBF Sent from my iPad
> On Sep 14, 2015, at 5:52 PM, Jim Brown <j...@audiosystemsgroup.com> wrote: > >> On Mon,9/14/2015 10:25 AM, Don Wilhelm wrote: >> I would preserve the balanced configuration through your switchbox and only >> connect the mic low to ground at each radio's plug. > > As usual, we agree. :) > > 73, Jim K9YC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to b.den...@comcast.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com