OK, Don, I've run into a little confusion: the bottom of page 11 of the
K144XV instructions has details about installing a new back panel with
an ANT 3 hole. However, I don't have a replacement panel and my K3s back
panel already has an ANT 3 hole. A few pages earlier the instructions
have a note to skip over some items if you have a K3s, but this is not
one of them; in fact, the skip instructions say to resume at this
point. It seems to me that I actually need to resume somewhere down
the page on page 12, but I'm having a little trouble figuring out
where. Thanks for any further help you can give me. -- 73 de Carl, N8VZ
Don Wilhelm wrote:
Carl,
The KRX3 must go in first. If you think about it, the K144XV fits
above the KRX3, so if you install the K144XV first, you will not be
able to get the KRX3 in place below it.
The K144XV instructions page 11 3rd checkbox tells you when to install
the KRX3 *if* you had removed it. This is the time to install the KRX3.
73,
Don W3FPR
On 9/21/2015 2:27 PM, Carl Jón Denbow wrote:
I seem to have a dilemma. I'm getting ready to install both the
K144XV and the KRX3A in my new K3s. The respective instructions each
say to remove the other first. I've read through both manuals, and
I'm still confused on the best order to do these two operations. I
put my KRX3A together last night, and it's ready to install after I
do the other things required inside the K3s itself. If anyone on
this list has installed these two modules at the same time, I would
very much appreciate their insights before I plunge forward. Might
save me from having to backtrack because I did a particular step
prematurely. Thanks for any help anyone can give me.
--
=================================================
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
[email protected]
www.n8vz.com
EM89wh
IRLP 4533 Echolink 116070
PSK and JT65 Forever!
=================================================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
