I think I got it working. I changed the K3S Settings to 915 - 170 and HRD/DM780 started decoding correctly. I was able to work N3P successfully ..TYTYTYTY... What threw me off was that the K3S was decoding correctly anytime I had the tuning close but I wasn't getting anything (not even garbage) on the computer. I'm about ready to wipe Windows 10 and go back to win 7. Actually with the way I operate I could almost ONLY use the laptop for logging and do the rest by ear or at the K3!
-----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Don Wilhelm Sent: Thursday, September 24, 2015 5:41 PM To: [email protected]; 'Elecraft Reflector' Subject: Re: [Elecraft] K3S - APF/RTTY question Jer, Which DATA sub-mode were you in? For RTTY, you would normally be in AFSK A and then you could activate the dual tone filter. I believe most use MMTTY for RTTY, but HRD/DM780, Fldigi and other waterfall oriented software can work as well. In AFSK A (or FSK D) the K3 is in LSB (normal for RTTY) unless you activate REV, and the K3 dial frequency is the mark frequency. Make certain that the mark frequency and rate in the K3 menu agree with your software application settings. Other soundcard data modes normally use DATA A where USB is the normal sideband. 73, Don W3FPR On 9/24/2015 12:35 PM, [email protected] wrote: > I was trying to work K3P on 80m RTTY last night (new mode for me) and > was struggling to understand the owner's manual. I don't fully > understand how to get the dual APF to display correctly and setup. At > one point the K3S appeared be decoding correctly sometimes as I would > sometimes see his call and 599. I rarely saw the correct station he > was calling and didn't consistently copy. I was never able to get HRD > to copy any of it. I was in Data mode and the CWT did show split > tuning but I struggled to get the right most set of bars to stay filled even after playing with the width/filter.. > > > > I'm sure this is just a learning process and I've tried several > websites on setting up for RTTY with no success. Anyone have a good > guide on the K3/S with/without HRD on RTTY? > > > Thanks in advance. > > > > > > Jerry Moore > > AE4PB, K3S - S.N. 010324 > > An Amatuer is - Considerate, Loyal, Progressive, Friendly, Balanced, > and Patriotic. > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
