You might just add a 0.05 mf 600V capacitor between the black to ground
and a 2nd one from white to ground at each light. Likely the Romex
comes into the box and the lamp is wire nutted on. Should be pretty
easy to figure out how to install a couple of bypass caps.
Before working on this, be sure and kill the breaker to the lamp circuit
as it will be hot all the time, even with the lamp off.
73
Bob, K4TAX
K3S s/n 10,163
My problem with stray RF isn¹t the TV or other electronic appliances, but
with the exterior motion sensor lights. 500 Watts on 20 meters turns one
of the three pairs on (always the same one). Since they are hard-wired
into the house, clip-on ferrite would be hard to do. I can live with it
if I have to. . . only effect is to scare the wildlife. But, suggestions,
anyone?
Ted, KN1CBR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
