Hi Gary, Yes and no.
Yes if you are using Tracking Mode where VFO-A is in the center of the screen. Tap the SPAN/CENTER button and change the span width to 5KHz with the P3 knob. Hold the SPAN/CENTER button to bring up the CENTER adjust feature. Turn the P3 knob clockwise to get VFO-A off of the screen. No if you are using Fixed-Tune mode. You cannot get VFO-A off of the screen. 73, Mike K2MK Gary K9GS wrote > Hello all, > > I am relatively new to owning a P3 / SVGA combo and have done some > searching and wonder if the following way of operating is possible? > > Let's say you have a DX station operating on 14025 and listening 5 to 10 > up. VFO A is on 14025 and VFO B is split on the 2nd receiver tuning the > 14030 to 14035 range. > > Is there a way to display the spectrum from 14030 to 14035, filling the > width of the screen? I would like to take advantage of being able to > look for holes or the station the DX station is working, taking > advantage of the big wide screen. > > 73, > Gary K9GS -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-View-a-range-of-frequencies-tp7608692p7608704.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
