Graham, I can duplicate it while simply transmitting a DVR message and plugging or unplugging the phones. The display then says ERR DSX d=000. Tapping any key clears the error message, but the radio remains locked up with the TX LED on. The only way to make the radio usable again is to turn it off and back on. I also noted that plugging/unplugging headphones during normal TX results in the monitor and and RF output disappearing, but no error message. Tapping TX still works in this case to take the radio back to RX. I don't see this as a problem, but more of a limitation. I simply won't be plugging or unplugging phones while transmitting! Mark KE6BB KX3 s/n 3500FW 2.34/1.33
-------- Original message -------- From: Graham g3tct <[email protected]> Date: 10/06/2015 09:53 (GMT-08:00) To: Bob N3MNT <[email protected]>, [email protected] Subject: Re: [Elecraft] KX3 - Odd behaviour using DVR I tap MSG, hold 1 or 2 for a message to be repeated. While transmitting, I unplug the headphones (or plug them in if previously unplugged). This causes it to stop transmitting, the KX3 display goes blank for a moment (scary!) then returns on receive. Can anyone else duplicate this problem? Graham ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
