Outside of the jack (hole) size is 6.50 +/- 0.04 mm diameter measured.
Hole has a little springy contact that will accommodate a smaller plug.
OD contact size of the plug is 5.50 +/- 0.02 mm measured.
Yeah, it's really confusing.
Brian, K0DTJ
On 10/9/2015 12:47, Dale Putnam wrote:
the outside contact size is what is being asked..
Mouser has a list of assortments.
Thankyou.
Have a great day,
--... ...--
Dale - WC7S in Wy
From: daleput...@hotmail.com
To: elecraft@mailman.qth.net
Subject: K1 Power jack size ?
Date: Fri, 9 Oct 2015 13:45:04 -0600
E620026 is the part number for the hole-through PCB mounted power plug for the
K1.
What is the outside size of that jack? the inside is 2.1mm.
I am planning to build a test jig for the K1 for the lab.
Thankyou,
Have a great day,
--... ...--
Dale - WC7S in Wy
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to huntin...@coastside.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
