Jeff,
Go back to something more simplistic - just set the XG3 for normal
signal generator operation. Do you hear the signal? If not, check with
XG3 Utility to see what frequency the XG3 is set to produce.
Once that has been verified, try the message - you should hear it at
that same frequency unless you have something in you coding that is
changing the frequency.
There is no more, but try with a more simplistic sequence - just the
text (no power level changes, etc.) and see if that works for you. Once
you have that working, try adding other things one at a time until you
have what you want.
73,
Don W3FPR
On 10/10/2015 7:46 PM, Jeff Maass K8ND wrote:
G'day Don:
The XG3 was on '30' to stat, with the LED on solid.
When I pushed/held the 'PF1' button to start the sequence, the '30' LED
began to blink and continued blinking while the sequence ran.
Is there more?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
