Hi, I'm learning macros and using the K3 test utility to learn. Tech MD is turned on.
When trying to set AGC SLP=000 and AGC THR=8 using the below commands the AGC SLP setting refuses to change. MN074;MP008;MN017;MP000;SWT14; Troubleshooting: Entering the following commands responds with ?: but I see the correct attribute displayed. MN017; MP; Variations I've tried for the data command: MN074;MP008;MN017;MP000;SWT14; MN074;MP008; SWT14;MN017;MP000;SWT14; MN017;MP000;SWT14; MN017;MP00;SWT14; MN017;MP0;SWT14; I'm not sure what I'm doing wrong.. Firmware version MCU 05.35 Tnx. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
