One other way is to program the LINK function into one of the PF buttons — one push and it links / unlinks.
Ted, KN1CBR ------------------------------ > >Message: 12 >Date: Sun, 11 Oct 2015 18:56:43 -0400 >From: Guy Olinger K2AV <[email protected]> >To: Bill Wiehe <[email protected]> >Cc: Elecraft Reflector <[email protected]> >Subject: Re: [Elecraft] K3 VFO - Linking >Message-ID: > <canckpc3461u630ci3j1ozgja8ovy2pay-z2qynwhhbk-urw...@mail.gmail.com> >Content-Type: text/plain; charset=UTF-8 > >Hi Bill, > >The D10 manual text has been superseded by newer firmware. The only way >now >to do a VFO link is CONFIG: VFO LNK. > >Tap on SUB toggles the subRX. > >Hold on SUB toggles diversity mode. > >This is true for both K3 and K3S. The K3S front panel has a yellow DIV >just >to left of the SUB button. This change from D10 manual procedure was the >result of a lot of discussion, and would seem permanent because big E has >etched it into the front panel. > >Tapping SUB does *not* clear VFO LNK > >Holding SUB (turning on diversity) *does* clear VFO LNK > >Note in VFO LNK, moving VFO B knob changes B) and *not* A). Moving VFO A >knob always changes *both* A) and B) by the same amount. > >73, Guy K2AV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
