Oops.. I just thought it was dead because all of the videos are dead links and the youtube channel appears to have been deleted.
I currently own the Ham Radio Deluxe suite. I was looking at using the Win4k3 to replace the radio control part and use the rest of HRD. I'm wondering if it would be best to customize HRD or go with Win4k3? I'm still researching things. At this point I'm looking to modify the HRD radio control interface (it's highly modifiable) but it's really a daunting task. The interface is ok but too busy. I was hoping to hear from other hams how they use/modify HRD..etc.. I don't want to get buried too far in projects that keep me off the air but don't mind the occasional distraction. At the end of it all I may end up using Win4k3 if I am not able to get HRD to do what I want. I'm not sure how to properly leverage HRD as I seem to operate primarily in the logging software which includes the DX cluster. I see the Radio control screen as mainly a place to setup and store configurations per band/mode/situation(DX/contest..etc) than something to run full time. Maybe I'm missing something ? One thing I'm considering is to remote my rig to my shop. Then I could have a tower in the back yard without long feedlines (that contribute to signal loss). Slowly looking at that. The Raspberry Pi hardware looks perfect as the bridge platform. Jerry Moore CDXA, INDEXA, SKCC, Fists AE4PB, K3S - S.N. 010324 http://www.qrz.com/db/AE4PB An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and Patriotic. -----Original Message----- From: Don Wilhelm [mailto:[email protected]] Sent: Tuesday, October 13, 2015 10:53 AM To: [email protected]; 'Tom'; 'Barry LaZar' Cc: [email protected] Subject: Re: [Elecraft] Windows 10 and LP-Bridge Jer, Win4K3suite is alive and well, and unless something has happened in the last few days, Tom va2fsq is actively supporting it. In fact, that is the same Tom who answered about using comOcom earlier this morning. 73, Don W3FPR On 10/13/2015 10:23 AM, [email protected] wrote: > I'm thinking Win4k3Suite isn't supported anymore. All of the video > links on their site are dead. > > Is anyone using Ham Radio Deluxe and is willing to share any > customizations ? I'm about to delve into that and don't want to > re-invent the wheel if someone has already done a bunch of it. > Thanks in advance. > > > Jerry Moore > CDXA, INDEXA, SKCC, Fists > AE4PB, K3S - S.N. 010324 > http://www.qrz.com/db/AE4PB > An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, > and Patriotic. > > -----Original Message----- > From: Elecraft [mailto:[email protected]] On Behalf Of > Tom > Sent: Tuesday, October 13, 2015 8:01 AM > To: Barry LaZar > Cc: [email protected] > Subject: Re: [Elecraft] Windows 10 and LP-Bridge > > Hi Barry, > No, com0com is a software null modem cable used to connect two pieces > of software via a virtual port pair. It has no logic for operating a > k3. The reason it works for you is that you are using Win4k3Suite, > which has a built in router that performs k3 command routing. win4k3 > has functionality that replaces lpbridge, and it uses com0com only as a connector. > 73 Tom > > Sent from BlueMail > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
