Andy,
Your K2 should have the old encoder, and the KPA100 shield and speaker
magnet shield should be the latest.
Yes, if you set Channel Hopping on, that would create something similar
to your observations if you had set memories on 40 meters.
73,
Don W3FPR
On 10/16/2015 3:21 PM, DL1XAS wrote:
Hello Don,
I have the number K2 6345 and I have also the KPA100 and the 160m module.
I looked at the KPA100SHLDKT , I think I could integrate for the future?
I have been written all the configuration of the settings i had done before,
and then i took the 456..
and all is okay now. The channel hopping may be the problem, but I couldn't
resume it.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
