Ed,
You will need to buy one additional bit, a good sound card. NaP3 is
a good product, It's really an earlier version of PowerSDR than is out
today. It is free, but you will want to download LP-Bridge, not Bridge2.
This will allow you to integrate your logging and digital software with
what you have your KX3 doing.
I used this initially and was quite happy. I later switched to the
Win4K3 suite which costs $50, but it does offer some real advantages.
First you can use com0com , which is free, for your port replication.
This setup has been less problem prone on my system over NaP3 and
LP-Bridge. Second, you have more control of your KX3.
73,
Barry
K3NDM
------ Original Message ------
From: "Ed via Elecraft" <[email protected]>
To: [email protected]
Sent: 10/16/2015 6:24:37 PM
Subject: [Elecraft] KX3 - easiest way to panadapt?
I have a KX3. I would like to use my computer and laptop ( Windows 7
and
Windows 8 ) to display a spectrum from my KX3, using the RX I/Q output.
What is the simplest and recommended easiest way to do this? NaP3 ?
I use my KX3 mostly on digital modes .... with SignaLink USB interface
and
sometimes with just the laptop soundcard interface.
Ed K7AAT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
