Dick,
In the N1MM+ Configurer, under the Mode Control tab, right hand side
where it says Mode sent to radio, beside RTTY make sure it is set to
AFSK (for both VFOs if you are using SO2V). If you set this to RTTY,
N1MM+ will put the K3 into FSK D every time you change bands, click on a
spot or use the software to change the radio's frequency.
Re the MIC control, after putting the radio into AFSK A mode make sure
that MAIN:MIC SEL is set to LINE IN.
73,
Rich VE3KI
K9OM wrote:
When I QSY, the K3S often switches from AFSK to FSK all by
itself, and then I have to manually select DATA MD and reset it to AFSK. (must
have reset it 25 times in the past 3 hours)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
