Byron,
LP-bridge must connect to whichever real port is connected to the K3S.
Look in your computer's Device Manager (open Ports) to determine which
COM port was assigned to the K3S USB to serial adapter, then tell
LP-Bridge to connect to that port.
73,
Don W3FPR
On 10/17/2015 2:04 PM, Byron Peebles wrote:
I do see how to SET the COM Ports in LP-Bridge, but I missed something
in how to tell what they should be on the K3S side. I would think I
need CAT Control, Analog Audio (RTTY AFSK) and CW Keying. What is the
means by which I determine the K3S side of things?
73, Byron
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
