That's my good idea for this year.  There won't be another one until 2016!

73 - Ken


On 2015-10-18 10:00 PM, Thorpe, Jeffrey wrote:
I think that's an awesome idea Lyle!
It took me a while to figure that one out, and it's the first thing (or one of 
them) that I tell someone when I find out the just got a KX3.

Jeff - kg7hdz

On Oct 18, 2015, at 6:40 PM, Ken Alexander <[email protected]> wrote:

Thanks Guys!

That did it!  WSJT-X has a transmit level control and WSPR doesn't. Turn out 
the output level coming from WSPR is much higher than from WSJT-X.  I had to 
reduce the Mic Level down to 1 to get it to work.

It's bedtime now.  Tomorrow, I'll reduce the level in Playback Devices so I can 
level the Mic Level the same for both programs.

Lyle, maybe the firmware could be modified so that all of the ALC bars flash if 
the transmitter is being overdriven?  Just a thought. With no bars showing the 
natural inclination is to dial up the level until you see something, which 
turns out to be the opposite of what should be done.

Thanks again gents!

73 - Ken



On 2015-10-18 7:29 PM, Lyle Johnson wrote:
Be sure you are not overdriving the Tx audio input.  Drop mic gain to 0, 
transmit, then slowly bring up the mic gain.  Overdrive will cause the ALC 
indication to misbehave.  This is on my list of DSP tasks when I get a 
roundtuit.

Lyle KK7P

On 10/18/15 4:24 PM, Ken Alexander wrote:
I installed WSPR version 2.12_r3617 a few days ago and it does not "appear" to 
be transmitting.  The VOX on my KX3 activates and the TX LED lights up, but no ALC bars. 
Switching between the ALC meter and the SWR/Power meter I can see that I'm putting out 5 
watts, but apparently no audio based on the lack of an indication on the ALC meter.  
HOWEVER, people are reporting receiving me on WSPRnet, so I'm not seeing any ALC 
indication but I'm getting out.

- The audio interface is a Creative model SB1095 external USB soundcard.
- I'm using the latest version of WSJT-X successfully with the same setup.
- Mode:  DATA A

This is weird.  Can anyone enlighten me as to what is or isn't happening?  I'd 
appreciate any assistance!

73,

Ken Alexander
VE3HLS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to