It was better before the change for all those without the 2nd receiver and now there is confusion with those who do have it. Sometimes it may pay to ignore the few customers who congregate on here? Just sayin.......flame suit on
Gary -----Original Message----- From: "Cady, Fred" <[email protected]> Sent: 22/10/2015 1:27 PM To: "William H. Hannon" <[email protected]>; "[email protected]" <[email protected]> Subject: Re: [Elecraft] Unable to Link VFO's in my K3 Hi Bill, A sort-of recent firmware change removed the ability to link vfo by a half-long hold of SUB. That now puts you into diversity mode. To link the vfo's there is a new config menu item VFO LNK that you use to link the vfos (set to YES). Also, in diversity, VFO B is not set equal to VFO A. It remains independent and can be used for split operation when in diversity mode. What does happen is that the sub receiver is switched to VFO A and is then controlled by VFO A. Cheers and 73, Fred Author of: “The Elecraft K3S and P3 – Getting the Most out from Your High Performance Station”. "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Portable Elecraft KX3 – Going for the Summit with the KX3 and KX3-2M/4M" “The Elecraft KX-Line – The Complete Station” “The Elecraft KPA500 and KAT500 – the K-Line Dream Station” Printed, coil bound copies of these are all available at www.elecraft.com pdf formatted copies available at www.ke7x.com “The Elecraft KXPA100, PX3 and 2M/4M Transverters – Assembling the KX3-Line Station” printed copy available at www.lulu.com and pdf from www.ke7x.com. Plus a book dedicated to the K3S upgrades for the K3 and a 3rd Edition of the K3 book are works in progress. Free guides at ke7x.com KPA500 and KAT500 Quick Set Up Guide http://www.ke7x.com/home/k-line-introduction-and-set-up-guide KAT500 and KXPA500 Tuner Operation http://www.ke7x.com/home/kat500-and-kxpa100-tuners ________________________________________ From: Elecraft <[email protected]> on behalf of William H. Hannon <[email protected]> Sent: Wednesday, October 21, 2015 9:07 PM To: [email protected] Subject: [Elecraft] Unable to Link VFO's in my K3 Brethren of the bands: I have a K3 with a sub receiver and when I try to link VFO's I go right to diversity mode. The sub receiver turns on and off but their is no stop with a mid push for linking. Also, when I hold long enough for "Diversity" mode, the sub receiver is NOT set to match VFO - A . What am I overlooking??? 73, Bill N8PW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
