Look on page 70 of the manual and you will find that you do not have the
correct transmit filter configured for SSB.
How it got that way, I have no clue, but that error says it is currently
incorrect. K3 Utility is the easiest way to configure the filters
although you can do it using the menu.
73,
Don W3FPR
On 10/29/2015 5:31 PM, efortner wrote:
I have just installed fldigi on the computer, configured it but do not have
the CAT control working yet. Will work on that later.
In the mean time when I go back to SSB on 20 meters and key the microphone I
get a red TX light and ERR TXF on vfo B. TX arrow points to VFO A
It transmits fine on CW. I have not changed anything in the
Configuration of the K3s or LP bridge except to add FLdigi to the LP bridge.
Anyone have a clue what to look for?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
