Jim,
Just assign each transverter to a unique TRN address number. The XV144
can be TRN1,2,3, or 4 depending on the setting of the DIP switch inside
the XV144. The internal K3 k144XV option is INT TRN1.
I don't have either the internal or external 144 transverter, so I
cannot test whether there is a conflict between INT TRN1 and the
external TRN1, but to be safe, I would suggest setting the external
XV144 to TRN2, 3, or 4.
73,
Don W3FPR
On 11/3/2015 8:39 AM, Jim Spears wrote:
Is it possible to configure the XV menu entries so as to have two
transverters defined with 144 MHz (operating band) -> 28 MHz (IF band)
configurations? One would be the internal K144XV and other an external
transverter using the low level XVTR IN and OUT jacks.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
