I use the default setting TX Dly 008 with my 87A with no problem. I would think that it would work fine also with the contempory 76s etc. 73 Elliott WA6TLA
On Nov 3, 2015, at 11:26 AM, Don Wilhelm <[email protected]> wrote: > Scott, > > The K3 KEYOUT can handle up to 200 volts as long as it is a positive voltage. > So +20 volts is no problem. > > I cannot comment on the delay settings, I don't have an Alpha amp. > > 73, > Don W3FPR > > On 11/3/2015 9:51 AM, Scott via Elecraft wrote: >> Out of an overabundance of caution I thought I'd ask first.... >> My manuals for my old Alphas suggest the amplifier keying line is 20 >> something volts DC +, and the K3 manual says I can key way more than that + >> DC. >> So I just wanted to confirm (or learn more): >> 1) I shouldn't worry about any kind of an outboard relay system, and >> 2) was curious if there is any other advice re delay settings etc. when >> using the K3 with old Alphas like the 374A and 76A. >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
