Do not plug in *any* RS232 adapter, including those supplied by Elecraft, without using an adapter cable as described on page 13 of the KIO2 manual:http://www.elecraft.com/manual/KIO2%20man%20rev%20C%20.pdf Failure to put that adapter between the K2 and the RS232 connection may result in serious damage to the K2. 73, Matt VK2RQ
Envoyé à partir d'Outlook On Thu, Nov 5, 2015 at 3:50 PM -0800, "Tom McCulloch" <[email protected]> wrote: Hi gang, I think this may have been previously covered, so I apologize if I'm redundant. I know the cable from the K2 to the nine pin plug is not wired in a "standard" way, but how do I go about interfacing my K2 to the USB port on my computer? I see this on Amazon, but I'm hesitant to try it: http://www.amazon.com/dp/B00425S1H8/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2BU7MNUYG3YU2&coliid=I1591SJBBKODFX Thanks for your help with this, Tom, WB2QDG K2 #1103 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
